MECHANICAL
Weight 14.3 lbs
Dimension (in inches)
Width x Depth x Height
Bill and coin tray
15.7” x 16.1” x 3.3”
Adjustable slots

ELECTRICAL
CR3000 (Control signal from POS printer)
Pulse amplitude
Pulse width
Pulse duty cycle
12 to 24 volts DC
100 to 200 milliseconds
10% max
CR3001
Power adapter input
Power adapter output
Power adapter current
120VAC; 220VAC optional
12 VAC
1000ma
CR3002
Pulse amplitude
Pulse width
Pulse duty cycle
12 volts DC
50u sec - 6.7 m sec
20% min.

INTERFACE
CR3000 (Printer Driven)
 Connects to POS printer drive circuit via cable
CR3001 (Smart Serial Interface)
  Serial input
    Data format
    Protocol (*default values)
      Baud Rate
      Parity
      Data Bits
  Parallel input
    Data format

RS232C

150, 300, 600, 1200, 2400, 4800, 9600*, 19200
None*, Odd, Even
7, 8*

Centronics interface
CR3002 RS232C, any protocol, bus powered

OPEN DRAWER COMMAND
CR3000 (Printer Driven) Pulse from printer drive circuit
CR3001
  Printer
  Dedicated RS232C
  Non-dedicated RS232C

  Parallel
Pulse from printer drive circuit
Any software transmitted data
Programmable security code (1-255 hex, preset to 07 hex)
Programmable security code (1-255 hex, preset to 07 hex)
CR3002 Any software transmitted data

NOTE
CR3000 (Printer Driven)
 Logic Controls supports most POS printers. Interface cable ordered separately. Please specify POS printer type when ordering cables.
CR3001 Power adapter, keys, serial interface cable (to computer), and manual supplied. For parallel connection user must supply cables.
CR3002 No power adapter required. Keys and serial interface cable supplied.

CONNECTOR PINOUT INFORMATION
For more information about CR3000 connector pinout, please download or print out the product brochure.